Fitting a Cat Flap

It may seem difficult to put up the flap for your cat, but with the right instructions, it's not too difficult. Firstly, determine how high you want the flap to be (on average, belly height). Mark this point on your door and use the included template as a guide when drilling.
If you have a kitten who is still a baby and you want to keep the door open, gently prop it slightly open and encourage it to pass through. Reward it when it goes through.
Take a measurement of the door
A cat flap is a wonderful option to allow your pet to leave and come in and out of your house as it pleases. This will keep your cat healthy as it will ensure it is exercising regularly and be able to go back inside if it is trapped outside during bad weather. This can reduce the time you allow your cat out or in and also make your home safer by notifying you when it's left.
However, it is essential that the cat flap is properly fitted to stop your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is essential to measure the height of your pet's belly as well as the doorway to your home so that you can ensure that the flap is at the proper height. If your cat is longer or taller than the normal, you can adjust the position of the flap by moving it up or down a small amount.
Next, use a spirit-level to mark the center of the door. This is where you'll install the flap. Then, using just click the up coming web site as an indication, cut out the shape of the flap using a Jigsaw. Once you've cut the space, sand down the edges of the door to create smooth surfaces and drill any fixing holes needed.
The process of fitting a cat flap is not as difficult as you may believe and it shouldn't take more than two hours to complete the entire process from beginning to finish. However, the process could be a bit more difficult when you have to install it onto the door of a uPVC or composite door since these doors come with a wide range of thicknesses that can affect the way the holes are cut and what they are fixed into. This is why we recommend hiring an expert to do the task, especially if you have never worked with glass before.
Measure Your Cat
A cat flap will save you from listening to your pet meow to let it in or out. This is especially helpful if you are at working all day and your cat is in the house waiting for you to get home in all weathers.
It is crucial to measure your cat first before you begin the installation. It might appear to be a simple task, but it's important to get the measurements right. In the event that you don't, your cat may find it difficult to use.
First, ensure that your cat is relaxed and not stressed prior to taking the measurements. You'll need to hold them in a way that they cannot move and also ensure that the measuring tape or ruler is flat against their body, not bending in any way. You can take a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.
Once you have the measurement of your cat's body, it's time to take a look at the door and decide where to place the flap. Place the flap at the level of your cat's belly. This will allow them to go through the door with minimal effort. This will also stop the flap from making a lot noise when it swings back and forward.
You should think about the thickness of the uPVC or composite door, as well. Although timber doors are of the same thickness, uPVC and composite doors are different in their overall design and can make fitting the cat flap more difficult as you will need to make sure the hole you cut is the correct size for your pet.
It is also worth studying the instructions that come with the cat flap kit to locate a template drawing that can be used to mark out the location of the hole in the door. This will allow you determine where the opening must be and make sure that the template is properly placed on the door. It is also a good idea to use a spirit-level to ensure that the template sits in a straight line against the door.
Cut the Flap
Before you can install your cat flap you need to cut the door panel to make a space big enough for it. It can be a difficult job and it is recommended that you hire a professional to help you if you lack the knowledge or skills. It is also recommended that you consult the instructions that come with the kit to learn how to do it correctly.
To do upvc door panels cat flap , you have to take a measurement of the height of your cat or kitten's belly and use that as an indication point. A good rule of thumb is to place the flap around 10-15 centimeters off the ground, as this is the typical belly height for cats. Your cat will be able to go through the flap without difficulty and will also make other cats or snooping neighbours an issue when trying to get in or out.
Mark the position of the cat flap on the door with a pencil. If your kit has the template, place it over the door. Use the marks on the template to drill holes in each corner. Then, you'll be able cut out the template and replace it with the flap for cats.
If you are installing your cat flap on the form of a door made of wood or uPVC, you can do it yourself if you feel confident enough to handle the Jigsaw. Ensure that you do not cut through any of the door's mullions, or vertical rails. You can use a jigsaw cut the panel into a square or a circle, depending on the design of your cat flap. Remember to take your time and don't force the jigsaw into cutting faster.
Once the hole is cut, carefully place the cat flap into its new place of residence. Make sure it is solidly secured. If it features caps for screws, then put these caps onto the screws that protrude. Once the screws are in place, you can sand any rough edges of the cut, and then seal any gaps to ensure there aren't any draughts entering into your home.
Fit the Flap
If you have a standard cat flap, you can encourage your pet to use it by placing a small amount cat food on the outside of the door. Alternately, you can push the cat through using your hand or a stick. Once your pet has become accustomed to walking through the flap, it will be able to come and go as it pleases. This lets you let it in and out whenever it wishes.
You can install an animal flap inside an UPVC or glass door although this may not be exactly the same as fitting it into a wooden external door because the UPVC and glass doors aren't a uniform thickness. This could have a significant impact on the way you cut the opening for the flap and can also affect whether your flap will fit properly once it's been put in place.
The mounting kit might include a template that shows you where to drill holes. If the kit doesn't come with the template, you can photocopy it to create your own. It's important not to press the jigsaw too in order to cut, so it doesn't create a larger than needed hole in your door.
The majority of cat flaps are square or rectangular in shape but there are some that are circular, and they are usually more difficult to install. If you have a circular flap, ensure that the hole is located in the correct place on the door. Otherwise, the cat may not be able use it, and may be outside all day (or at night).
Certain cat flaps come with locks that let you determine when your cat is allowed to enter and leave. They are helpful when your cat is scared of leaving in the dark, or coming back in the dark. They can also be helpful if you work all day. The lock can be turned on for entry or exit and some are locked in both directions, which allows you to close the door completely. This is especially beneficial for sick or elderly cats who aren't keen on going out in the rain.