15 UpAndComing Window Repair Bloggers You Need To See

Window Repairs
Window repairs can save homeowners money and keep their homes warm. In the event of serious damages, like broken glass or a shattered frame, a replacement window may be required.
But many other issues can be addressed to extend the life of your windows. Common issues include:
Broken or cracked Panes
Glass that is cracked could be caused by a lawnmower that throws rocks at the wrong time or the blow of a tree branch by strong winds. It's not just visually bad, but it can cause higher energy bills because the broken pieces allow cold air into your house. It's fairly easy to fix windows with broken panes.
Begin by carefully removing the glass with gloves and safety glasses. You may have to use a utility knife to break loose any remaining putty or glazing compound around the edges of the frame. Then, clean the glass's surface and the wood of the frame with a soft cloth or paper towel.
After cleaning the area, apply a silicone caulking that is waterproof to the frame's edges. This helps prevent water from getting in through the crack, which can cause further damage to both the frame and the glass.
If you have double-pane glass, cracks that are not treated properly could weaken the gas layer that lies between the panes and render your windows less efficient in insulating. If the crack is so severe that it is threatening the structural integrity of the window or if the pane inside is not there it is possible to call a professional.
Cracks in thermal stress can occur when there's a significant difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If this happens across two windows it's best to replace the glass instead of attempting to repair it.
Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It can also keep out bugs and cold wind. You can cut the length of a nylon stocking to cover the entire crack and glue it with duct tape. This isn't a long-term solution however it can be useful in a pinch and it keeps cold air and insects out of your home. If your windows are older and you're beginning to see cracks in the glass, it's an excellent idea to talk with the local window company to determine if replacing the entire window would be the best alternative for you.
Rotten Wood
Wood rot is among the most frequent issues with windows. It can ruin a house's appearance and pose a safety danger. It is possible to fix rotted wood. The first step is to ensure that the cause of the rot has been taken care of. Check for roof leaks and other places where water could get into the wood.
Next, you will need to remove any rotten areas of the window frame. This can be done with a rasp, chisel or claw hammer. After removing the rotten wood, you'll need to replace it with fresh wood. Pre-treated wood is suggested for this project since it is resistant to rot. If you are unable to replace the wood damaged by rot, you can try using wood filler or hardener to repair the damaged area. This kind of product will be found in a lot of hardware stores. Follow the directions on the label of the product to ensure the best results.
After you have repaired the rotten areas of the windowsill, it's important to protect the repaired area. This can be done by applying a waterproof wood sealant. Sikkens for instance is a great one to apply.
It is also possible to use an epoxy filler with two parts to protect the wood from further damage. This product is easy to apply and leaves a beautiful finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried it is possible to sand the wood's surface. window repair is recommended to begin with a rough layer of sandpaper before moving to a smoother one.
The final thing you want to do is to make the area that has been damaged by exposing it to more water. It is a good idea therefore, to cover the repaired surface with an oil-based prime that will protect it from water. Then, you can apply the waterproof wood sealant.
The W won't let you open
There are many reasons why a window won't open. The house may have settled or the wooden frames may have warped in rainy weather. There is also the possibility that someone put them in place to protect themselves. However, with a bit of patience and the right tools, most windows that are locked can be opened.
One of the most frequent causes of windows that isn't opening is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges, and locks. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease can help to prevent the oxidation process and ensure that your window is operating well.
The pulleys used to raise or lower the window could become loose, or break. These parts can lose their tension and cause obstruction especially when the window is situated two or more stories higher than the ground.
If you are having trouble opening windows, try using a pry bar to gently force the window open a little at one time. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood and make it easier to move.
Another issue for windows that aren't opening is a defective spring that prevents the window jamb from lowering or rising. You'll need to refer to the owner's manual for more details based on the manufacturer of your windows.
If you've tried cleaning the moving parts of your windows and lubricating them but they're still unable to open It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home go from being functional to unusable. If a window isn't properly shut can make your home vulnerable to burglary and water damages. Contact us for more information on our windows replacement services and products today!