10 Misconceptions Your Boss Has About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good shape.
For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this situation, you will need to source some plastic spacers that assist the new pane to fit properly into the frame of the window.
If you are going attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the fabric rather than on the floor, where they could be trampled upon and cause further damage.
After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is significant, you may prefer a security screen that also has a window. This will provide the best of both.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash window. However, over time they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.
Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you are happy with the fit of your window, you can tighten screws to hold them in place.
If you are unable to move the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and safe from drafts.
uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.
3. Water Leaks
It is essential to take action if get up each morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.
It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you may need to replace the window.
Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or are loose and blow open with a breeze It could be hinges at fault. They can be replaced by any competent DIYer and are usually done within a few minutes.
Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It is essentially a very simple process, but it's simpler if you have someone to help you hold the frame up.
Verify that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.
The issue could be caused due to opening the window in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you suggestions.
It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.
5. Discover More Here can be caused by different things. The hinges, also due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. These can be easily repaired by giving them good cleaning, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.
The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the risk of draughts.
Another, and most effective ways to cut down on drafts is to use a draught excluder, these are typically fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.
Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than repair them. If you encounter any issues with your Upvc window, it's best to consult a professional as soon as possible.