An EasyToFollow Guide To Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob
If your 500 remote key fob isn't functioning, it could be time to replace the battery. If fiat key fob replacement do replace the battery and it doesn't work it is likely to be elsewhere.
At United Locksmith, we specialize in the creation of new keys for old cars. We have the tools and components needed for this job.
Dead Coin Battery
The most frequent reason why your Fiat 500 key fob will not unlock or lock the doors is due to a dead battery. The battery inside the key fob can be depleted quickly in the event that you don't use it often enough. If your remote started to show signs of weakness such as a loss in range and stopped working completely The battery is probably dead.
Metal clips hold the battery securely within the key fob. If the clips aren't secure, they could cause problems with contact that can prevent the remote from receiving power. Use a flathead screwdriver to pry open the retaining clip and remove the old battery. Use a battery that has the same voltage, size, and specifications as the original.
Water exposure can cause the key fob to corrode or be damaged. Even a brief bath in soapy water may cause damage to the electronic chip inside. Make sure your key fob is dry.
Water Damage
If your key fob isn't working properly, it could be due to water damage. Key fobs are fitted with rubber seals that prevent them from being damaged by a light rain or splashes of water, but it is very important to keep your keys away from the ocean, pool, and washing machine!
The key fob has an electronic chip inside it that sends a signal to your car's immobilizer system. The chip is what allows the 500 to lock and start. If it gets wet, it will no longer function.
If you're trying to determine if your key fob is still working, you can clean the internal electronics using isopropyl or electronic cleaner. It is recommended to replace a key fob in the event that it is submerged in salt water rather than try to repair it yourself.
A replacement fob could cost you some money but it's far less expensive than paying to have your Fiat 500 towed to a dealer and repaired there! Plus, you can do it yourself in the simplest of steps. Be sure to have the correct type of battery prior to opening your key fob. You can find step-bystep instructions for any car keyfob on the internet.
Faulty Chip
The chip in the key fob connects directly with the immobiliser in your car to ensure that your vehicle will only start when the proper keys are inserted. If the chip is damaged, or damaged in any way the car won't start.
Damage to the water or a dead cell battery are the most frequently cited reasons for the chip being damaged. It is best to leave the job to a professional locksmith, who will be able to replace the chip in a short time and at a a reasonable price.
If your key fob fails to function after exposure to clean tap water or rain, take out the battery and wipe down the electronic component with a paper towel to ensure that it is completely dry before putting it back into. If the key fob does not function, there's the possibility that it's damaged components and requires to be replaced.
Some people will turn to their dealer when they are in need of a new Fiat key fob, however this is a expensive option. If you are looking for a low-cost solution to have your Fiat key fob repaired then look no further than United Locksmith. We have the tools and expertise needed to repair your Fiat key fob in a quick and professional manner.
Faulty Receiver Module
Fiat key fobs transmit an electrical signal to the vehicle that will unlock and lock doors (and start the car for vehicles with an automatic transmission) up to 50 feet. There are many reasons why the fob could not function. These include a dead coin battery or water damage buttons, worn ones, a receiver module issue and signal interference or an electronic chip malfunctioning.
If the fob was in a pocket which has suffered severe trauma (such as being dropped onto the hard floor or washed in the washing machine) it might not be able to connect with the Body Control Module (BCM) of the vehicle. This is because the BCM is secured and will only accept signals from a genuine original key and not accept any other.
You will need to replace the fob in case this happens. A professional locksmith will handle the entire process of replacing your key including programming a new one for your 500. They can even give you a clone fob that works exactly the same way as the original (and costs only one-third of what it would cost).