20 Key Repair Websites Taking The Internet By Storm

How to Do a Broken Car Key Repair
You're in a hurry to get your work done and you put your keys into the ignition. You try to turn the key however it locks. the lock.
There are several ways you can try to solve the issue before calling a locksmith. Here are a few quick fixes:1. Super Glue.
1. Contact a locksmith
One of the worst things that could happen to the owner of a car is a damaged key in a lock. This can be even more frustrating if it occurs while the driver is hurrying to get to work or drop off the child. In this situation it is essential to act quickly and attempt to get the key out of the way.
Contacting a professional locksmith is the best option because they'll have the right tools and know how to get rid of the broken keys without damaging the lock. A lot of people look around in their vehicle for something thin and rigid like a paperclip, or toothpick, but these usually won't work as it is too thick to fit into the lock.
The best way to do this is to use a pair of tweezers. They are small and are able to easily get inside the lock. They should also be rigid enough to hold the damaged part of the key and pull it out. If you don't have tweezers, it's worth searching for a set sold at auto parts stores. They are thin and flat with hooks that are small enough to be inserted into the key hole and grip on the broken piece of the key.
Another possible solution is to find an magnetic key hook that can be affixed to the metal inside the lock and be pulled out. This isn't always the best option because it could be caught in the lock and cause further damage to the lock. In such a scenario it is advised to call an expert locksmith.
Some people try to glue together the two pieces of a broken car key with superglue in order to take it out of the lock. This could be risky as the metal pieces may tangle and break later. It is also crucial not to turn the key, since this could cause further damage to the lock or the ignition cylinder. Get a locksmith professional to replace the broken key on the spot.
2. Drill a hole
Sometimes, a key gets damaged inside the lock, and even with a spare, you might not be able to gain access to your vehicle. In these instances drilling out the lock is the best choice.
It is important to ensure that the keyhole is set up for a basic tumbler. If it's not it, you will not be able to remove the pins without damaging the door, and possibly damaging the lock mechanism.
The next step is to understand that you'll be drilling through the outer plastic layer and the inner metal layer. A small drill bit is sufficient to penetrate these layers, but it is important to be sure to not go further than this. If you drill too deeply, it can damage the internal wiring harness or cause the drill to snag.
Wearing a mask or protective gear is also advised when using drilling. This will prevent dust and dirt from getting into your lung.
Finally, it is recommended to have pliers and tweezers on hand in case the damaged key is sticking out of the lock. If the key is long enough to be able to be grasped with pliers and tweezers, it will be enough to get it out. If not, you'll have to use an instrument such as this to wedge it into the lock and then turn it towards the key to grasp it and take it out.
3. Drill a nail
If you break your car key in half, it could cause you to be trapped. There are a variety of ways to fix the problem without having to pay an locksmith. The first option is to use a nail or screw. These can be found in your home or at a hardware store. It is best to choose a nail as thin and long as you can. This way you can fit it into the hole, and then use epoxy to join the two pieces together. It is also important to ensure that the back of the nail is flat. This will allow it to fit into the slot cut in the key. This will stop it from moving around and potentially breaking again in the future.
4. Super Glue
Many auto owners use DIY hacks, like using super glue to repair a damaged or broken key. This is a dangerous practice. You could end up damaging the lock and needing to pay more for finding a replacement at the dealer or a locksmith.
The first step is to take a look at the broken keys and make sure they match each other in terms of size. This is vital to ensure that the glued pieces will be properly aligned and that the key fits into the lock after they are bonded together. Then, using a piece fine-grit paper or a metal filing, smooth the edges of the damaged pieces. This will strengthen the glue's bond and decrease the possibility of a key that is loose.
After you have polished the edges of the broken key, apply a small amount super glue to one of the ends. Use only the smallest amount of super glue, since too much can make the key too heavy. It will then be difficult to fit into the lock. After lining up the two pieces of the broken key then press them together. After some time, the glue will start to set and join the key fragments.
A bobby-pin or a paperclip can also be used to remove a broken key from the lock. They can be cut like a pick and then inserted into the lock. This technique is particularly helpful in the event that the broken part is inside or near the keyway or the ignition hole.
Another thing to remember is that if the broken car key has electronic components that require a new key cut from the dealership or a professional locksmith. This is because the key needs to be programmed with a brand new code and the chip needs to be replaced. If, however, only more tips here or shell of the key fails, it usually just requires the cutting of a new key and doesn't require replacement or reprogramming of electronics.