20 Key Repair Websites Taking The Internet By Storm

How to Do a Broken Car Key Repair
You're headed to work, in rush, and put your keys to your car in the ignition. You try to turn it, and it snaps off from the lock!
Luckily, there are a few options you can try to fix it before calling a locksmith. Here are a few easy fixes:: 1. Super Glue.
1. Call a Locksmith
One of the worst things that can happen to a car owner is a broken key inside a lock. This is especially difficult if it happens while the driver is trying to get to work or drop off a child. In this case it is imperative to act fast to attempt to get the key out of the way.
Calling an experienced locksmith is the best choice, as they'll have the right tools and know how to get rid of the broken keys without damaging the lock. Many people are looking for something that is thin and rigid like paperclips or toothpicks. But, this is not the best option since they are too heavy to fit inside the lock.
A much better solution is to look for an tweezers set, since they are very thin and can easily get into the key hole in the lock. They should also be rigid enough to hold the damaged part of the key and then pull it out. If you don't own tweezers it might be worth trying to locate keys extractors which are typically sold in auto parts stores. These are flat, narrow and have small hooks. They can be put through the keyhole to grab the broken part of the key.
A magnetic key hook can be used to adhere to the metal in the lock and then remove it. car remote key repair isn't always the best option as it could get caught in the lock and cause damage. In such a situation, it is best to contact an expert locksmith.
Some people try to join the two pieces of their car key that have snapped together with superglue, as it will help them get it out of the lock. However, this could be very risky as the bits of metal may cling to one another and break apart again later on. It is also crucial not to turn the key as this can cause further damage to the lock or ignition cylinder. Call a professional locksmith to repair the broken key on the spot.
2. Drill a hole
Even with a spare key, you may not be able to access your vehicle if a key breaks inside the lock. Drilling out the lock may be the best solution in these situations.
First, you need to make sure that the key hole is designed to accept a standard tumbler car key. If it's not then you won't have the ability to drill the pins out and cause damage to the door or internal lock mechanism.
It is important to keep in mind that you will drill through the outer layer of plastic as well as an inner layer of metal. A small drill bit is enough to penetrate these layers, but you must ensure that you don't go any deeper than that. If you drill to deep it may cause damage to the wiring harness or cause the drill bit to stick within the hole.
It is also recommended to wear a mask and protective equipment when working with drills. This will prevent dust and dirt from entering your respiratory system.
Finally, it is an excellent idea to keep two pairs of pliers and tweezers on hand in the event that the broken piece of the key is sticking out of the lock. If there is enough of the key protruding to be able to grasp with tweezers or pliers, this should be sufficient to get it out of the lock. If there isn't, however, you will require a tool such as this one to insert the tool into the lock and then turn it toward the key to grip and pull it out of the hole.
3. Drill a nail
If you smash your car key in half, it could leave you stranded. There are a variety of ways to fix the problem without having to pay a locksmith. The first method is to utilize a screw or nail. They can be found in your home or in a hardware store. It is recommended to pick the nail that is as thin and long as you can. This way you can fit it into the hole and then use epoxy to link the two parts together. It is also important to make sure the back of the nail is level. This will make it easier to fit in the cut slot of the key. This will keep it from moving, and could even prevent it from breaking again in the future.
4. Super Glue
Many motorists resort to DIY hacks, such as using super glue, to repair a damaged key. This is a dangerous practice. You could end up damaging the lock and have to shell out more money for finding a replacement at the dealer or a locksmith.
First, examine the broken keys and make sure they are identical in terms of size. This step is essential to ensure that all glued pieces are aligned correctly and that the key will fit into the lock after they have been bonded. Then, use a piece of sandpaper with fine-grit or a metal file to smooth the edges on the damaged pieces of the key. This will strengthen the glue's bond and decrease the likelihood of a future loose key.
After finishing the edges after polishing, apply a small amount (about a pea-sized amount) of super glue to the other side. Be careful not to apply too much glue, because this could cause the key to become too heavy and it will be difficult to fit into the lock. After lining up the two pieces of the broken key, press them together. After a few minutes the glue will begin to set and bond the key fragments.
Another household item that can be used to help remove a damaged car key is a bobby pin that can be made into a pick-like tool and placed inside the lock. This method is particularly useful when the damage is close to or inside the keyway or ignition lock hole.
Another important thing to note is that if the damaged car key has electronic components, it will require a new key cut by the dealership or a professional locksmith. This is because the key needs to be programmed with a new code and the key chip will need to be replaced. If, however, only the shell or metal portion of the key fails, it usually just requires an entirely new key cut, and doesn't require reprogramming or replacing of the electronics.