17 Reasons You Shouldnt Avoid Truck Keys

Types of Keys For Trucks
Around the mid to late 90's, companies began placing a transponder chip in the head of their keys. The chip emits a signal that is interpreted by the receiver in your ignition. If the code isn't compatible the code, your car won't start.
These are often referred to as "chip keys." Beishir can make these for you at a fraction of the cost of a dealer.
Transponder Keys
A transponder key, also referred to as chip key or immobilizer key, is an electronic microchip in the head of a car key that contains an unique code. When a key is inserted into the ignition it sends a signal to vehicle's computer which verifies the key is activated and is authentic. If the code is valid the vehicle will open the door and allow you to start your engine. It also disables any security devices. This technology eliminates theft and provides an extra layer of security for your vehicle.
A regular transponder key looks similar to a regular metal key, however it has a plastic top where the transponder is located. It could be a traditional flat cut key or a laser cut one (also called a sidewinder cut), or a tibbe type key which is used in Jaguars and certain Ford models.
When the key is placed in an ignition, the antenna located on the ignition ring transmits a burst radio frequency energy to a transponder embedded within the key. The chip then responds by sending an identifier that is sent back to the antenna ring. The signal is then checked by the vehicle's computer and, if valid it allows the vehicle start.
These keys cannot be duplicated because the chips are unique. This has caused many customers to go to dealers for all their car key needs. Unfortunately, this usually results in a large price and lengthy appointments. Thankfully, a professional automotive locksmith can create a replacement or reprogramme a transponder key at a fraction of the cost.
A professional auto locksmith can also be used to test the operation of the transponder. The professional can check for physical damage to the key and the microchip itself, and also confirm that the transponder is communicating with the immobilizer system of the vehicle correctly. If the key is not communicating correctly, it will exhibit signs such as difficulty starting the vehicle or error codes on the dashboard.
Sidewinder Keys
A sidewinder key is a kind of car key that was designed to provide extra security for your vehicle. They are designed to ensure that thieves are unable to get into your lock, damage your lock or rekey your ignition. These keys are made by combining a mechanical edge and a small RFID or RFID emulator chip. The chips emit radio frequencies that helps your car detect whether the key is authorized and allows it to start the engine.
A sidewinder is an excellent alternative to a transponder for your truck, even though it's not as well-known. It still provides you with greater protection from theft. While these keys are difficult for thieves to pick up or bump, they could still be damaged through a re-keying process. Therefore, it is essential to use an experienced locksmith for all of your key-related needs for your vehicle.
The car keys were initially used by the automotive industry as a security tool in the early 90s. The aim was to cut down on car thefts. Since then the technology has been a standard feature on all modern vehicles.
The high-security blade is the most distinctive characteristic of the sidewinder. Laser cut keys differ from older metal blanks with notches cut on the side. Instead, they have an elongated winding grove that is cut into the blade's center at a consistent thickness. This unique design of the blade gave the key its name and is a certain method of identifying the sidewinder from a normal metal key.
Apart from the curly cut on the blade, sidewinder keys possess other features that distinguish them from traditional car keys made of metal. They are distinguished by the fact that the blanks of the keys aren't cut all the way through leaving a narrow middle part (sometimes called the web) which helps strengthen and support the key.
This web is crucial as it will ensure that the key can fit inside the locks of your vehicle. If the web isn't thick enough it could make the key not work when it is inserted. Also, it may damage the locks if pushed in too forcefully. It is therefore essential to have your existing key decoded by a professional locksmith who will then cut a new key to the right size.
Wafer Keys
A wafer key is a type of cylindrical lock that uses a series of flat wafers to block the rotation of a plug. The wafers are placed in upright slots inside the lock's housing and extend into large grooves on the outside of the plug. When the correct key is entered, the wafers are retracted back into the plug and stop turning. A lock made of wafers may be more difficult to recognize than pin tumbler locks, but it is still relatively simple to master with a bit of patience.
Wafer locks are extremely popular for many reasons. They're inexpensive to manufacture they are secure and reliable operation, and are easy to reset. These features make them a preferred choice for industrial, commercial and residential applications. Wafer locks can be used with many keying systems. They are a flexible and a flexible security solution.
To ensure that keys cannot be interchanged, manufacturers often use key codes which contain two increments between each cut. This makes it harder to make a key by accident since each increment permits only a certain number of combinations. This is why you'll find that the majority of lock types have a set of cuts that are all a certain height, for example a 1 and a 2 instead of an increment of one or three.
To select a lock made of wafers first, you have to insert a diamond-shaped or ball-shaped pick inside the lock and apply a slight pressure to each wafer. When you feel the wafers have been pulled back into the plug, then insert a key with the same cuts into the lock and turn it to open it.
You can now begin working on the other side. This will be the first goal, as it's the one that prevents the lock from turning freely. In addition, you'll need to find the binding wafer, which can be easily identified by smelling every single wafer. A binding wafer isn't going to rise as quickly as the rest because of its tension.
Laser Keys
When it concerns keys for trucks, laser-cut keys are a newer technology that offers better protection against car theft. These keys are expensive but they provide an additional layer security for your truck. They are made using laser cutters, not a standard key cutting machine, and have distinct patterns that make them difficult to copy. This means that thieves are less likely to be able to use your key to take your car, truck, or other valuable objects.
Laser-cut keys are distinctive because they feature laser grooves which can only be created by a laser. They are much more difficult to copy, and cannot be copied at any corner tool store that has a machine for cutting keys. The keys are laser-engraved design on both sides so they can be inserted from either side into a lock, and still function.
In the 1990s, laser-cut keys were developed to enhance security on top-of-the-line automobiles and other vehicles. Apart from truck key replacement that they are difficult to duplicate, they have a transponder chip inside. The chip is able to communicate with the vehicle's receiver to unlock and start it. If the wrong chip is present, the vehicle will not start when the wrong key is in.
In addition to the additional security laser-cut keys offer they are also much easier to use than traditional keys. They can be opened with one hand since they are designed to go into the lock on both sides. Traditional keys require two hands to insert. This is not ideal for busy people with a lot of things on their plate.
The greater security that laser-cut keys provide is worth the price. The loss of one of your keys can be expensive therefore investing in this extra security is a wise investment. A professional locksmith can help you select the most suitable key for your truck and program it to work with the specific vehicle you have.