20 Repair Car Key Websites That Are Taking The Internet By Storm

How to Repair Car Key Fobs
Even though we test them many a times keys are not indestructible. They can actually be destroyed in different ways.
Other issues can be more grave than an unresponsive battery. Fortunately, many of these issues can be solved with a quick DIY fix at home.
Dead Battery
A dead battery is the most common cause of a key fob that is not working. repair car key can be drained quickly, particularly if they're exposed to extreme temperatures, humidity or water. It's a good idea to keep an additional fob battery in your wallet just in case.
The LED light will usually stop glowing when the battery in the car key fob is running low. The key fob could also stop working at the same distance it used to. In this instance the key fob could need to be programmed again or replaced altogether.
Fortunately replacing the car key fob battery is a simple task. Find out the kind of battery used. The type should be engraved on the back of the fob. If you are not sure it is, doing a quick Google search can help. Open the key fob along the seam once you have identified the battery type. Use a flathead screwdriver, or your fingernail to pry apart the two halves. Then, you can remove the old battery and put an alternative one in its place. Make sure to insert the new battery with the positive (+) side facing towards the buttons on the fob.
Some drivers might not be aware that their fob is dead until they try to lock or unlock their car and the buttons don't respond. This can be corrected by reprogramming the fob. However it can be time-consuming and expensive. Another option is to contact roadside assistance and see if they are able to jump your vehicle and get you back on the road.
If you've tried both solutions and your car still doesn't start, it's time to call an expert. A qualified technician will be able to determine if the car's computer system needs reprogramming or if the fob requires a replacement battery. They will also suggest a reputable auto shop to replace your fob's keys. Sometimes, however, a new fob may be the best solution.
Circuit Board Damage
Key fobs aren't impervious to destruction, but it can withstand a lot of physical damage. The battery, the circuit board and buttons will all experience their fair share of wear and tear with time It is therefore essential to be vigilant and take care of them in order to keep your car key fob working well.
Check that the battery is still working on your key fob. Replace the battery to see if it solves your issue. If not, you might need to open the key fob and clean the contact surfaces. This can be difficult since some key fobs don't have easy-release mechanisms to unlock them and you may end up damaging your key fob if try to force it apart. You can buy a special tool to open your key fob, but you must always follow the manufacturer's instructions to avoid damaging it.
Another issue that is common is a damaged or damaged circuit board inside the key fob. It can be caused by many things like moisture or dirt that gets into the battery compartment software problems or even an accidental firmware update. If your key fob has stopped functioning completely, you should consider having it reprogrammed by an expert locksmith who specializes in this type of work.
Radio interference is also a possibility. This can occur if you have other wireless devices around that transmit on the same frequency, for example, radar detectors or home security systems. If this is the case you need to get in touch with the manufacturer of the other device to ensure that your key fob won't be affected by their signals.
It's also possible that your key fob is equipped with an issue with the switch or another electrical component that must be replaced. There are online guides that show you how to fix this yourself. It's important to be careful when doing this, though, as the circuit boards in your key fob are tiny and are susceptible to breaking if they are handled roughly. If you're doing this yourself, make sure to use a high quality SMT switch and then solder it in place correctly.
Buttons that are worn out
Car key fobs are prone to a lot of wear and tear. They are more prone to being dropped and spend a lot of time being tossed around in your purse or pocket. The constant jostling can cause the buttons to wear down or get stuck. When this happens an easy adjustment could be all it takes to get it working again.
Modern key fobs come with sensors that are able to detect when they've been hit. They're designed to detect this so that they can reduce the likelihood of someone stealing your car. If the buttons on your key fob aren't responding when pressed, they are worn out and should be replaced.
The circuit board in the key fob also sends signals to your car. The signals include unlock and lock commands, as well as commands to start your engine. If the circuit board inside is damaged, your key fob may not be able to unlock or start your engine. Generally, this kind of damage is caused by water, blunt force or a scratch on the circuit board.
If you're forced to press the buttons more than usual in order to activate them the key fob buttons are getting worn out. Additionally the fob might stop sending a signal to the car or it'll have less range than before.
If you're unable to get your key fob to unlock or start your car, it's important to contact a locksmith near you immediately. They can tell if the key fob is damaged or if the cylinder of your ignition is worn out.
Fortunately, the majority of car keyfob issues aren't very complicated or even serious. The best way to ensure you don't get caught off guard by a malfunctioning key fob is to keep an extra in your pocket at all times. This will ensure that you're not stuck in a bind because of a lost or malfunctioning key. If you do lose your spare car key, a locksmith can help change the key so that it works with the ignition in your car. They'll also be able to fix any internal damage that's occurred to your key fob.
Broken Case
The case of the key fob does more than just protect the buttons and batteries. The case also houses the circuitry that does all the electrical magic every time you press the button on your key fob. This board receives the signal from your key fob, and then transmits it to your car.
If the board is damaged or dead the key fob won't be able to operate. A dead key fob might only need to be reprogrammed by your local auto locksmith, or dealership.
Batteries could be the reason the key fob's not working. This is a quick fix that you can do at home by replacing the battery. The good news is that you can get a replacement battery on the internet or at a local auto parts store since these batteries are not exclusive to key fobs.
There are a variety of ways to open up a key fob and get inside, based on the kind. A quick internet search should identify the type of key fob yours is and what kind of battery it requires. You can then purchase a new one, take the old one out and then put the new one in.
The most important thing to consider when fixing a broken car key fob is that you don't want to cause damage to the circuit board or buttons any further. If you attempt to remove the fob using an edge that is sharp like a screwdriver could cause damage to the case or damage the plastic. A replacement case is inexpensive and you can find a complete fob assembly including the electronic components on eBay or Amazon for less than $40.
If your key fob isn't functioning, check to see if the batteries are depleted or if the circuit board has been damaged. If this is not the case, you can have it repaired quickly and inexpensively by an expert. Otherwise, it might be time to invest in a replacement. Be sure to check the warranty on any fob replacement or used that you purchase online.