5 Hook Locks For Doors Projects For Any Budget

Types of Deadlocks for Doors
Hook bolt deadlocks can be installed on narrow storefronts made of aluminum sliding doors to increase lock strength and security. They have keys on both sides that allow for greater flexibility.
To accurately measure a new lock, first determine the door's case thickness (or backset). This is the distance from the edge of the door to the center of the latch hole.
Tubular Latch
The tubular latch is the most sought-after door latch. It's easy and simple to install, making it a favourite of DIY enthusiasts and joiners alike. It's available in a variety of sizes, shapes, and quality levels that will fit any style door handle.
A tubular latch features a rectangular steel casing that includes a spring-loaded follower as well as a latch bolt (also called a striker). When you open the doors, the latch retracts allowing you to lock and then close the door. When you close the doors the latch bolt springs back and grabs the edge of frame to secure the door closed.
When you're fitting a tubular latch, you'll have to decide on the height you'd like the latch to be positioned on the door. Many people believe that a latch and handle should be positioned at a height of one metre above the floor. However, this is not always the case. The latch on a door knob should be placed in the middle of the rail. This is where the bulk of the weight is transported by the door when it is opened and closed.
Once you've determined where the latch will sit, mark the position of the hole on the door and on the strike plate using a pencil. Then drill hook deadlocks for the screws that will be used to secure the plate to the door. After you've made these holes then, use a countersink to make sure the back of the plate is flush with the door after it's screwed into place.
If you are looking for a more robust alternative to the standard tubular latch, consider opting for a double-sprung model. The door will close more smoothly when you use this latch, as it comes with an additional spring that moves the tongue. It also has a heavy-action, spring-loaded spindle follower that ensures that levers and doorknobs are returned to their horizontal position after each use.
After you've attached the latch to the door, you'll need attach a strike plate to the frame. The strike plate is a piece of metal that is inserted into the gap left behind by the latch after it's closed. To accomplish this, mark the location you would like the strike plate to rest on the frame that is surrounding it. Cut with your knife an appropriate square for the plate and then take it off.
Cylindrical Latch
Interior doors are typically equipped with cylindrical locks. They can be located in offices and homes, and are very versatile in terms of their uses. Cylindrical locks operate similarly to mortise lock systems however they are much easier and faster to install. They do not require that a "mortise" or pocket be cut into the door's frame as mortise locks do. The bore or hole is cut into the frame of the door and they are inserted into that. They are available in various sizes and can be used with both knobs and levers to open and shut the door.
The primary difference between cylinder and mortise locks is that only a specific key can open these types of locks. This is because they employ pins of different heights inside the cylinder, and springs to keep the pins in the right position. Once the key that is correct has been inserted into the cylinder, the pins will align with each other and allow the cylinder to turn. This allows the latch bolts to retract which allows the door to open.
If the wrong key is used and the pins aren't aligned correctly, and they stop the piston from moving. It's important that you use the right key to gain access to your office or home.
The cylinder is situated within the door's body and is connected to the operating trim using either a half-round or square extension. There are also tiny notches carved from the cylinder's sides that match with key notches. They are designed to align when the correct key is placed in. Once the cylinder is moved by the latch bolt, it will follow suit.
A strike plate is a metal plate that catches the bolt that is projected to lock. The strike plate is generally made of heavy steel and it is secured to the door frame with screws. It also has a strike opening into which the latch bolt of the lock engages.
When replacing a cylindrical lock ensure you use the proper tools to remove the old lock's handle or knob and latch bolt. Once the old hardware is removed, mark the location of the new latch bolt and strike opening on the door and door frame. It's a good idea test your lock's operation by pressing against the strike plate or latch bolt by using your finger. If the strike plate or latch bolt is damaged or does not operate correctly, you should consider replacing the bolts and strike plates.
Key-Locked Latch
This type of lock is controlled with a key on the outside and a lever or knob on the inside. This type of lock is suitable for doors that aren't susceptible to being tampered with, like in offices. This type of lock allows for the outside lever to either be locked or unlocked, while the inside knob/lever is free to be used for immediate exit. The key is only required to pull the latchbolt back when the door is closed.
The pins of a key-lock line up and are pointed towards a line known as the shearline. When the key that is correct slides into a lock, the pins are aligned with the shear line, and the plug can be turned to release the latchbolt. If you've had a lock that was perfectly aligned, but the lock would not open, one of the pins may be out of alignment with the shearline.
hook lock latch are also utilized on some locks. They can be decorative or add strength and protection to the locking mechanism. The plates are usually found on mortice locks, rim locks and locks with reversed springs.
A strike plate is also available. It is usually connected to the door frame and the jamb. It has a hole through which the bolt is moved from the cylinder and into the lock. It is usually used in conjunction with deadbolts for an additional level of security.
There is also the cylinder that holds a series of pins that align with the key's point to prevent it from turning. A good quality cylinder is very difficult to break into without the right tools and understanding of how to pick it. To lock a front door, turn the key in the same direction the door opens. If the door opens with the right hand, for instance the key needs to be turned clockwise to secure the door. To unlock, turn the key counterclockwise. This is different from other locks, such as Chubb locks, which require you to turn your key in the opposite way of how the door opens.
Keyless Latch
A keyless latch allows you to lock and unlock your door without using a traditional key. These locks can be controlled through a smartphone application or an access code. Some models include a hidden security camera. Consider your security needs and compatibility with your existing doors and hardware when selecting a keyless lock. Review the manufacturer's instructions and specifications before installing. Certain keyless locks could require special door modifications or preparations.
Several companies are developing smart locks that can replace traditional keys and include additional security features. They can be opened by a code, fingerprint, or facial recognition, and are usually more durable than traditional locks. Certain smart locks also come with tamper-proof features and can detect when a door has been opened by a key that isn't authorized or force.
Latch is a company that has designed an elegant and high-tech lock, similar to other smart locks. Its primary target market is realty companies which manage apartments. The lock can be opened by tenants by using a passcode key or a mobile device. They can also allow in cleaners, dog walkers or guests who are not from town by using temporary codes. The company claims that this will stop tenants losing their keys, and will reduce maintenance costs since there's no need to replace locks when the renter leaves.
While the Latch lock isn't yet available to consumers yet however, it may eventually find a place in condos and large apartments. The company has already started testing the lock in a handful of locations and plans to release more units this coming year. The price is roughly the same as a standard lock, and the company offers low prices and affordable fees for software.
You can change the shortcuts at any time by using the Latch App. To do this, start the app and then select the menu located in the upper left-hand corner of the screen. Then select 'Widgets', and choose the doors you wish to display as shortcuts. You can view the access history of your doors through the Latch App after you've configured them.