5 Laws To Help In The Window Repair Industry

Window Repairs
Window repairs can help homeowners save money and make their homes comfortable. In the event of severe damage, such as broken glass or a damaged frame, window replacement may be necessary.
Many other issues can be fixed to extend the longevity of windows. Common problems include:
Cracked or Broken Panes
It's a rock that's been that was tossed by your lawnmowers or a tree's branch blown by high winds, damaged window glass isn't just visually unappealing, but also can result in higher electric bills since the broken pieces let cold air into your home. Luckily, it's typically easy to fix windows with cracked panes.
Begin by carefully removing the glass with gloves and safety glasses. You may need use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood using a soft cloth or paper towel.
Once the area is clean and dry, apply a waterproof silicone caulking on the frame's perimeter. This helps prevent water from getting in through the crack, which can cause further damage to both the frame and the glass.
A crack that is severe in double-paned glass could compromise the gas between the panes, making your windows less insulative. If the crack is severe enough that it compromises the strength of the window or the inner pane is missing it is possible to consult a professional.
Cracks caused by thermal stress can occur when there's an extreme difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens to two windows it's best to replace the glass rather than trying to repair it.
For cracked windows that aren't yet ready to be replaced, clear tape can do a decent job of stabilizing the crack and preventing the entry of bugs and cold air. You can cut an area of nylon stocking or tarp sufficient to cover the crack, and glue it in place with duct tape. It's not an indefinite fix, but it will keep insects out and cold air away from your home. If you notice cracks on your older windows it is recommended to contact the local company to determine if replacing the whole window is the best option.
Rotten Wood
Wood rot is among the most frequent problems that plague windows. It can ruin a house's appearance and pose a safety hazard. However, it is possible to fix rotted wood. Recommended Reading is to ensure that the source of the rot has been taken care of. Check for roof leaks and other areas where water can enter the wood.
Next, you will need to take out any rotten parts of the window frame. This can be done using a claw hammer, chisel, or rasp. After you have removed the decayed wood, you'll have to replace it with new wood. It is recommended to use pre-treated wood for this project as it will be resistant to decay. If you are not able to replace the wood damaged by rot, you can try using wood filler or hardener to strengthen the damaged area. Many hardware stores will carry this type of product. To achieve the best results, follow the instructions on the product label.
Once you have replaced the decayed areas of the windowsill, it is important to protect the repaired area. You can do this by applying a water-resistant wood sealant. Sikkens, for example is a fantastic product to use.
Use a two-part epoxy in order to protect the wood from further damage. It is simple to apply and provides an excellent finish. It is important to follow the directions on the label. After the epoxy filler dries, you can sand down the wood's surface. It is best to start with a rough grade of sandpaper and then move to a smoother grade.
The most important thing you don't would like to do is make the area that has been damaged by expose it to more water. So, it's a good idea to cover the area that has been repaired with an oil-based primer that will protect it from moisture. Then, you can apply the wood sealant that is waterproof.
Won't Open
There are many reasons why a window won't open. Wood frames can warp when exposed to rainy weather, or the house might have sunk or someone may have nailed it shut to protect themselves. With a little patience and the right tools you can unlock most stuck windows.
The accumulation of gunk or debris can be a major cause of windows that aren't opening. Acme Glass notes that dirt and grime accumulates over time on the sliding tracks, hinges and locks. Additionally, metal hardware is prone to get rusty when in contact with humidity or direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent oxidation and keep your window operating well.
Stuck windows may be the result of a loosening or breakage of the pulleys that are used to raise and lower the window. The components may be weakened and obstructed when they are situated at least two floors above the ground.
If you have trouble opening a door, you can use a pry-bar to gently open the door. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Alternatively, try running a hair dryer along the edges of the frame for a few minutes to warm the wood and allow it move more easily.
Another common issue for windows that aren't opening is a defective spring that prevents the window jamb from lowering or rising. You'll need to check the owner's manual for additional details based on the manufacturer of your windows.
If you've tried cleaning and lubricating the moving components on your windows, but they still cannot open, it may be time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows go from functional to useless because windows that aren't properly shut could expose your home to water damage and burglary. Contact our team today for more information about our replacement windows and services!