5 People You Should Meet In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The broken glass in your windows can cause significant damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.
Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However when you have double pane windows that are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case you'll need source some plastic spacers that help the new pane to fit properly into the window frame.
Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.
After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, as this will offer the best of both worlds.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they can suffer from a variety of problems including sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.
To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're happy with the fit, tighten the screws until they stay in position.
If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.
uPVC handles could also become loose. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. When it comes to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.
Verify that the drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.
Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.
It is also important to remember that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and open with ease, it may be hinges at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical part, hinges can be damaged over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.
Check that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.
The issue could be caused either by opening the window improperly or by a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to provide suggestions.
Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by various factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes an opening to appear where the sash meets the frame. If they're beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window, can be misaligned. Again, it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.
The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the possibility of draughts.
Lastly, on the main page of the most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be positioned on the top of your windowsill. They can help block out cold air and keep your home warm and cozy!
Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than fix them. If you encounter any issues with your upvc window you should consult an expert as soon as possible.