A Relevant Rant About Double Glazing Lock Repairs

Double Glazing Lock Repairs
Quality locks on your doors and windows will help prevent burglars from getting into your home. They don't usually like to break glass or try to get through windows that are open.
Certain double glazing owners however, have experienced problems with their door or window lock after installing. These issues can be solved without the need for new double glazing.
Broken or Faulty Locks
A locksmith can fix your uPVC window lock or door lock if damaged or is not working properly. They can fix hinges, striker plates and locks for your double glazing. They can also move the cylinder around to correct any misalignment issues which could cause your handle to not operate correctly.
The mechanism could be seized when the key fits into the lock, but it will not turn or be difficult to insert. The dirt or grease could be trapped in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. It is crucial to apply a dry lubricant such as graphite or teflon, rather than oil, which attracts dirt and adhere to the inside of the mechanism. After lubricating the lock, you need to insert the key and then try to turn it. The lubricant must get into the mechanism and the lock should be able to turn easily.
The loose screws inside the lock mechanism are another reason for a broken lock. They can become loose and break off or fall out completely and stop the lock from functioning properly. A screwdriver is a tool to tighten these screws, however, it is important not to over-tighten them since this could cause damage to internal components.
A damaged lock could be dangerous for both you and your family members especially if you have small children. They can open the door without knowing and gain access to your house. If you're concerned about this happening, a locksmith who is vetted can provide rapid and effective service to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing that can fix any type of defective and broken mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, meaning that in many cases replacement doors and windows are not necessary.
Handles that are damaged or broken
As part of their overall security package, most double-glazed windows feature a multipoint lock. This is an excellent option for those worried about potential thieves who may try to gain access to your home. It's also worth asking your installer about anti-lift locks that can be installed in addition to the existing locks and ensure that your window is secured in its closed position.
It's not uncommon for handle locks to become damaged or fail - they are the first component of your window that could be pushed open by criminals intent on breaking into. Luckily, the good news is that this is among the most straightforward parts to fix.
Modern uPVC handles and aluminium handles come with the multi-point locking mechanism referred to as Espagnolette that is designed to ward off forced entry. This security upgrade is available as an option with new uPVC windows. As double glazing window repairs made of aluminium or uPVC that are no longer used can be upgraded to the shoot bolt locking system.
It is important to repair handles as quickly as you can if it's damaged. The damaged handles could stop the window from closing properly and allow drafts to enter. It could also be a vulnerability that thieves who are opportunistic could take advantage of, putting your family's belongings and you at risk.
To repair the damaged mechanism, you must first access the window frame and then remove the damaged handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This will allow a replacement that matches the profile and the internal window frame mechanisms.
After the mechanism has been replaced the handle can be returned to the original screws. However, we recommend replacing them with longer screws as they will provide a more secure fit. The final step is to seal the handle with a clear sealant. This will help protect it from further deterioration. After this step is completed your window will be functioning again at a fraction the cost of replacing it.
Broken or Faulty Hinges
If your windows do not close properly, draughts could be able to enter, your home's security barriers will become weaker, and there is an increased chance of damp or water damage. Broken or faulty window hinges are a typical problem that can be fixed easily.
If you have a uPVC windows that isn't able to open or close, it's likely your hinges are broken or damaged and require replacement. While a lot of window companies require that you purchase a new window unit in order to resolve this simple issue We're able to repair the hinges that are damaged and save you money.
Window hinges can often break after repeated use, or they might be damaged by corrosion over time. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This means not causing the window to open or close.
Identifying your hinge type will help you identify the right parts to repair it. Maco, Mila and Roto are all manufacturers of window hinges. It's best to consult an expert in this regard to ensure that you don't make the mistake of buying parts that aren't compatible with your current hardware and cause further damage.
Faulty hinges can be a major issue for your uPVC windows and doors. They can be a major source of noise and also allow for water infiltration which can damage your windows.
Check whether the pin barrels on both hinge halves are aligned. If it isn't tapping the headpin, use a hammer in order to create an incline in the hinge barrel. This will keep the pin in place. Have a person hold the doors while you remove hinge screws and hinges. Replace the hinges and install screws with glue. After the glue is drying, secure the hinges with clamps or weights.
Once the hinges have been fixed, you should be able to re-install the door and attach the handle. It is a good idea to replace the screws using the same length of dowels as the original screw, so that they match up with each other.
Broken or damaged glass
While uPVC windows do a great job of keeping the cold out and warm in, they are susceptible to becoming damaged over time. This can include broken or damaged glass, as well as faulty locks. This is a problem that can be costly should it be left unattended. It can also hurt the appearance of your home and can result in a decrease in insulation. double glazing repair is essential to repair any damage immediately.
If the glass is cracked but not shattered it is possible to fix it yourself using the right tools and methods. Be sure that the area surrounding the broken glass is clear of debris, so that shards do not cause injury or trip hazards. Next, remove any broken pieces and dispose of them in a safe manner. Apply masking tape across the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. Making sure the glass pane is fitted prior to gluing it in place is recommended if you are dealing with windows that have two panes. This will ensure you have enough room to finish your project.
Before applying the glue, wipe the surface of the broken frame and glass with a an unclean, dry cloth. Follow the instructions for application and curing time, which can vary from product to product. You may need to clamp the glass that has cracked with clamps made of lightweight materials designed to hold delicate materials, depending on the angle.
Once the adhesive is fully cure, carefully install the glass in the window frame, ensuring it's flush with the edge of the frame and that there aren't any gaps between the glass and the window sash. Be cautious not to flex the window when it's being reinstalled, as this can weaken the seal and cause condensation and water infiltration.
If you have a glass window that is broken completely or has bigger cracks, consult a professional glazier such as O'Brien(r) to arrange an exchange. If you leave broken glass unattended, it could cause danger to pets and children and is why it's important to act quickly.