A Rewind What People Talked About Repairs To Upvc Windows 20 Years Ago

Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like timber and aluminum.
It is important to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to ensure that your windows are in good working order.
Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers to aid the new pane in being able to fit correctly into the window frame.
Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.
It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is large, you might be interested in the security door with an integrated window as it offers the best of both worlds.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, over time, they are susceptible to a range of problems including sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.
To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure they remain in position.
If window repairs near me are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.
UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. The first step is to close the window and perform a test fit. The corner joints of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
If you awake to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce your energy efficiency.
Verify that the drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.
It is also important to remember that if the leak originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and blow open in a breeze It could be hinges at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a very simple process but it can be simpler if you have someone to help hold the frame up.
It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.
The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to improper installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to offer suggestions.
Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form where the sash joins the frame. If they are beyond repair, it might be necessary to have them realigned. The interlock may be disaligned. This happens on the hinge side and could require to be cleaned. In some cases it is possible to replace them.
These seals can wear down or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the risk of draughts.
The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking cold air.
The windows made of upvc can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them instead of fixing them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as you can.