Forget Automotive Key Repair 10 Reasons Why You Dont Have It

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all been there: your car keys won't turn in the ignition. It could occur at the most inconvenient time, such as when you're loading your trunk full of groceries or returning home from work.
Rather than panic, there are several different solutions to get back on the road. Here are a few common automotive key problems and their solutions:
Broken or bent keys
The most common reason why a car owner cannot begin their vehicle is a bent key. It can be fixed by simply straightening the key. This might seem easy, but you must be cautious. The key is very thin and can break if you bend it even slightly.
You'll need a solid work surface and a pair pliers to do this. Hold the key at the other end using the pliers, and bend it until it is straight. This can be done on a flat surface, or in a vise. Then, you can put it in the lock to see if it changes.
If not, you may need to get a new one made. This will prevent you from having to call a locksmith and will ensure that your key will work.
Keep a spare key in your purse so you're not left without the ability to get into your vehicle if yours is damaged.
If you're experiencing problems with a bent or broken key, try putting some grease on it prior to inserting it into the lock. This will allow it to move easier through the cylinder, and also prevent it from becoming stuck. It is possible to use a spray graphite powder or lubricant. If using a spray, ensure you attach the plastic tubing included with it for an easier application. This will also help to prevent moisture from ruining your key.
Pins that are snuck or springs
A pin (also known as a roll pin, or a spring) can sometimes get stuck. A pin is a small 2 to 3 inches (5.1-7.6 cm) long piece of metal with hollow ends used to connect two parts of machines. In most cases you can take a nut off by pulling it off using your fingers or a wrench.
If you own a newer vehicle that is equipped with a key with a microchip in it, there is an opportunity that the key has to be programmed in order to work with your vehicle. This process can be simple or complicated depending on the car's manufacturer and model.
Contact us if you require assistance with your car keys or locks! We can repair, replace or program virtually any car key.
Gear Selector
It's crucial to take your car to a mechanic as fast as you can if the gear selector is stuck in park. It's a safety concern and could cause serious damage to your vehicle if continue to drive it. This could be a sign that your transmission is experiencing more serious issues, which can be costly to repair.
Fortunately, the majority of the time this problem is easily fixable. The most common reason the gear selector may get stuck is because one of the cable ends has snapped or disconnected from the lever itself. This is a straightforward fix and the mechanic can usually complete the task within a few minutes.
In some cases the bushings of the gear selector might be damaged or worn. These are rubber coverings that are placed around the joints within the gear system, allowing it shift more smoothly. These covers work similarly to cartilage joints, so they need to be healthy and flexible.
You can prolong their lifespan by doing a few simple things. It is best to avoid the gear selection in extremely cold weather. This is because the cables controlling the gear are prone to freezing and cracking. You should also replace your bushings, like the ones manufactured by First Line, with high-quality ones.
These bushings are a critical component of your gear selector and should not be ignored. If you notice that yours is wearing out, it's a great idea to visit an auto repair shop that specializes in Land Rover repairs. These experts can help you locate the right parts to repair the gear selector mechanism. They can also offer many other services, such as maintenance and repair of your transmission.
Dead battery
If you turn on your key in the ignition but you don't hear anything except a click, your battery is dead. As batteries age, they undergo natural processes that cause them to die prematurely. The negative plates of your car battery will begin to become coated with sulfate crystal deposits.
A dead battery could cause you to lose the electrical power in your vehicle and cause the radio or the electric windows to fail. If you've been having difficulties starting your car in cold weather, it could be a sign that you require an upgrade to your battery.
Sometimes your problem might not be a dead battery, but rather a malfunction within the charging system of your vehicle. Your mechanic should make sure that the alternator, serpentine belt, and battery cables are working correctly can resolve this issue.
A key fob that is not functioning properly is a common problem for automotive key repair. The key fob is a small device that connects to the vehicle's computer and relays signals and commands between the engine and accessory systems. car key circuit board repair may become confused or cease communicating with your vehicle if it is exposed to extreme temperatures or gets wet.
You can usually reset the lost key fob following the instructions provided in the owner's manual. Depending on your vehicle you may have to open and close the doors, turn lights and other electronic devices on and off by pressing a specific sequence of buttons, or even shut and open the windows. If this doesn't fix your fob, it might require professional programming, which will require an expert technician. It's worth trying these simple methods before you buy an entirely new fob.
Ignition socket
Modern car keys come with a transponder which, when inserted into the ignition, transmits the signal. The signal is sent to an immobilizer to determine if the key is correct for the car to begin. In the 1990s, theft of vehicles became a problem that most manufacturers put this transponder security system in their vehicles for security and insurance purposes.
If you have a brand newer vehicle, the only option to replace your keys could be through the dealership or by contacting the manufacturer directly. Write down the VIN (vehicle ID number) of your car prior to you go. This can be found on the dashboard's front, door jamb, or in your owner's manual.
Bring your working key to an AutoZone participating store. A staff member will employ a machine which will trace the contours of the blank key to precisely duplicate the original key. The new key will be cut on site with a precise cutting machine. If your key is equipped with blade, fob, or a thick head that is grey or black it must be programmed for your car before you can use it to start the motor.