How To Get More Results Out Of Your Automotive Key Repair

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all been there - the car key won't turn in the ignition. It can happen at the worst possible time, such as when you're loading your car with groceries or returning home from work.
Rather than panic instead, there are a variety of solutions to get back on the road. Here are some of the most common automotive key problems and solutions:
Broken or bent key
A bent key is the most frequent reason why car owners are unable to start their car. This can be easily fixed by simply straightening the key. It might sound easy but it's important to do it with care. The key is extremely thin, and bending it even one degree can cause it to break.
To do this, you'll need an area with a solid foundation, as well as a pair of pliers. Grab repair car remote control key at one end with the pliers and bend it until it is straight. This can be done on a flat surface, or in a vise. You can then place it in the lock to see if it turns.
If not, it could be time to have a new key cut. This will prevent you from having to contact a locksmith and can ensure that your key works.
Keep an extra key in your pocket to ensure you're not left without the ability to get into your vehicle in the event that your key breaks.
If you're having difficulty inserting a broken or bent lock key, try applying oil to it. This will help it move more easily through the cylinder and stop it from becoming stuck. Spray graphite powder or lubricant. If you are using a spray, be sure to attach the plastic tubing that came with it to ensure a more precise application. This will also help prevent water from destroying your important.
Stuck pins or springs
A pin (also known as a roll pin or spring) can become stuck. Pins are small 2 to 3 inches (5.1-7.6 cm) long piece of steel with hollow ends, which are used to connect 2 parts of machines. In most cases, you can remove a nut by pulling it off using your fingers or a wrench.
If you have an older vehicle that has a microchip key, it is possible that the key needs to be programmed to function with your car. This procedure can differ based on the manufacturer and car.
If you require assistance with your automotive keys or locks, give us call! We can repair or replace any vehicle key.
Gear Selector
It's important to get your car to a mechanic as soon as you can if the gear selector is stuck in park. This is a security issue and you could cause serious vehicle damage if continue driving. This problem is also a sign of bigger problems with the transmission itself, which could be expensive to fix.
Fortunately, the majority of the time this problem can be easily fixed. The most frequent reason the gear selector can get stuck is that one of the cable ends has snapped, or become uncoupled from the lever itself. This is a straightforward fix and a mechanic will usually complete the task in a couple of minutes.
In some instances, the bushings on the gear selector could be damaged or worn. Rubber covers are placed around the joints of the gear system to make it more fluid. These covers work similarly to the cartilage that you have in your joints, and therefore require to be flexible and healthy.
It's not unusual for them to wear out over time, but there are some things you can do to prolong their life. First, you should avoid using the gear selector during extremely cold weather. This is because the gear control cables tend to freeze and cracking. You should also replace the bushings with premium quality ones, such as the ones from First Line.
These bushings form an important element of your gear selector, and should not go unnoticed. If you notice that yours is worn out, you should visit an auto repair shop that specializes Land Rover repairs. They will help you find the right parts to fix the gear selection system. They can also offer a variety of other services like maintenance and service for your transmission.
Dead battery
If you turn your key into the ignition but you don't hear anything but a click, then your battery is dead. Most batteries last between three and five years, and as they get older, they go through natural processes that cause them to die prematurely. This is because the negative plates inside the battery of your car will begin to become coated with sulfate crystals.
A dead battery can also cause you to lose electrical power within your vehicle, causing the radio or the electric windows to fail. If you have been having difficulties starting your car in cold weather, it could be a sign you require an upgrade to your battery.
It's possible that your issue is not due to an unresponsive battery but a malfunction in the charging system. This problem can be resolved by having your mechanic verify that the alternator, serpentine belt and battery cables all work properly.
Key fobs that are not functioning properly is a common issue with automotive keys. The key fob is connected to the computer in your vehicle, and relays signals and commands between the engine and accessory systems. This system can be confused or cease communicating if it is submerged or is exposed to extreme temperatures.
You can usually reset a lost key fob by following the directions in your owner's manual. Depending on your vehicle it may be necessary to open and close the doors, turn the lights and other electronic devices off and on by pressing a specific sequence of buttons, or even open and shut the windows. If this doesn't solve your fob it may require professional programming which will require the services of a technician. However, it's still worth attempting these steps before you decide to pay for a new device.
Ignition socket
Modern car keys are fitted with a transponder, which when inserted into ignition, sends out the signal. The signal is sent to an immobilizer to determine if the key is correct to allow the car to start. In the 1990s, car theft became a major problem. The majority of manufacturers have installed this transponder system for safety and insurance reasons.
If you have a brand newer car, the only way to replace your keys could be through the dealership or by calling the manufacturer directly. Write down the VIN (vehicle ID number) of your car prior to you leave. This can be found on the front of the dashboard or door jamb in the owner's manual.
Bring your current key to an AutoZone participating store. A staff member will use a machine that will trace the contours of the blank key to precisely duplicate the original key. They will then cut the new key with an exact cutting machine in-store. If the key you have is a blade type, a key fob, or has a hefty grey or black head on it, it'll have to be programmed to your specific vehicle before it can be used to start the engine.